Tested. Working Perfect. Enables ide devices to be used over the SCSI bus

PRODUCT OVERVIEW 

Converts the device interface IDE (ATA/ATAPI) to SCSI bus 

Supports asynchronous mode and 20M, 10M, and 5M bytes/sec synchronous mode data transfers for SCSI bus 

Supports PIO modes 0 to 4 for ATA bus and DMA 0 to 2 for multiword 

Equipped with I-O Data Device's IDE-SCSI conversion IC (model name: I•O98064), the hardware can simultaneously control SCSI and IDE transfers by using a 16-byte FIFO data buffer eliminating idle and wasted time so that ATA/ATAPI device speeds can be directly achieved. 

The SCSI bus REQ signal output system employs I-O Data Device’s SCSI-IDE converter IC (model name: I-O98064) open drain buffers and low noise 3-state buffers, and can be configured using a short-circuit socket (jumper).

 PRODUCT SPECIFICATIONS 

1) Product Name IDE-SCSI Converter 

2) Part Number IDSC21-E 

3) External Dimensions 126.31 mm (W) ? 34.75 mm (D) ? 22.49 mm (H) 

4) Weight Approximately 35 g (board only)

5) SCSI Interface

     ANSI SCSI-2 (X3.131-1986) and ANSI SCSI-3 FAST-20 (X3T10/1071D) compliant

6) IDE Interface

    ANSI ATA-3 (X3T10/2008D) compliant